The effectiveness of the PestWest professional insect light traps are greatly increased due to two main features:

• Universal PestWest glue boards offer some of the largest catch surface areas in the marketplace, enabling a greater catch per board whilst combining the versatility of a board that can be easily adjusted to fit the desired system
• The glue boards are positioned so that they sit closer to the UV tube than other models, providing a more rapid catch

This is possible thanks to the Reflectobakt® sleeve. This sleeve shields the full-sized glue board from the drying effect of the UV light, thus making the systems more effective for longer periods of time.

PestWest offers a full range of adhesive boards for its Mantis and Pro range of glue traps, including a black board to efficiently conceal the catch.

• Gray grid matrix boards are available as an option, for easy insect counting and monitoring. Boards can be retained to provide an accurate record
• Premium plastic glue boards inhibit mold and ideal for high moisture areas
• Extra large, 926 square inch (463" x 2) glue boards for the Mantis 4x4 system for extra protection

NOT ALL GLUE BOARDS ARE THE SAME

The PestWest universal glue boards will fit most insect light traps combining versatility with the highest quality technology.

PestWest boards are double-coated, front and back, to protect against moisture absorption, in steamy or high temperature environments such as kitchens etc. This avoids the problem of the board warping with time, which can create problems when replacing boards.

As a special hard glue is used on the PestWest boards, the glue stays on the board and not on your hands or clothes, if accidentally touched. Other cheaper, more inferior boards often have wet glues that can be messy to handle. While wet glues appear very sticky to the touch, many of them form a very thin hard skin on the glue surface when in contact with air or UV light. This can prevent small insects from being trapped.